Registered: 4 months, 1 week ago
Introduction to Panic Alarms
The purpose of a panic alarm is to permit a person under duress to quickly and silently call for assist in the occasion of an emergency. Panic alarms are additionally called "duress alarms", "hold-up alarms", or "panic buttons".
Panic alarms are used when it may be unsafe or uncomfortable to call for assist in different ways. For example, if a belligerent particular person is standing in your lobby, it could also be unwise to additional escalate the situation by picking up a phone to call for assistance. A panic alarm can provide a quick and convenient way to summon assist without drawing attention.
Silva Consultants feels that almost every enterprise can benefit from the usage of panic alarms. Locations where panic alarms may be particularly useful include:
Receptionist's desks in building lobbies.
Security stations and checkpoints.
Customer service counters.
Check-out counters and cashier's stations.
Rooms where cash or different valuables are obtained, processed, or stored.
Interview rooms in Human Resources department.
Executive office suites.
Locations where confrontations with the general public are likely to occur.
Components of a Panic Alarm System
Panic alarms encompass two primary components:
The panic button is the device that the person prompts when he or she wants help. There are lots of kinds of panic buttons available. These can have a single pushbutton, pushbuttons that should be pressed simultaneously, devices that have to be squeezed, and units which might be activated by a foot or knee. There are also devices that may be covertly activated when cash or a product is removed on the request of a robber. Most panic buttons are specifically designed to resist accidental activation.
Panic buttons are normally put in in a location where they can simply be reached, yet out of view of the informal observer. In many cases, panic buttons are put in on the underside of a desk or counter-top.
Panic buttons will be the wired type or wireless type. Wired panic buttons are linked utilizing cabling. Wired panic buttons are very reliable, but it can sometimes be difficult and expensive to get cable to each panic button location.
Wireless panic buttons use a brief-range radio transmitter, just like that used with a garage door opener. Wireless panic buttons are straightforward to put in and might be positioned just about anywhere. Wireless panic buttons can also be carried round on the premises by employees if desired. Wireless panic buttons require batteries and should be tested often to assure that they're operating properly.
The communications system is the tactic that's used to summon assist when a panic button is pressed. The type of communications system used depends largely on the resources available on the facility the place the panic alarm is being installed and the level of security threat.
Types of communications systems used can embrace:
Communications to an off-site alarm monitoring middle:
This methodology would typically be used at facilities that shouldn't have an on-site security staff, equivalent to at a small business. The panic buttons could be related to an alarm control panel which sends a signal to the monitoring heart when a panic button is pressed. The alarm monitoring center would then call the police or different appropriate people to reply to the site.
Communications to security management center:
Most massive corporations have some type of centralized security monitoring and control center, either on-site, or at a central location someplace within their organization. When this type of resource exists, panic buttons are typically monitored on the control center. Most frequently, panic buttons are linked to the group's access management and security administration system, which transmits the alarm to the control center.
When a panic button is pressed, it sounds an alarm in the security management center. The middle would then dispatch local security officers and/or the police to reply to the site.
Communications to non-security personnel:
Some organizations that do not need on-site security choose to inform non-security personnel when a panic button is pressed. Often, the group will type a "response workforce" consisting of employees from a number of departments (Facilities, HR, etc.) and ask that these employees respond when a panic button is pressed.
There are numerous systems that can be utilized to notify the response crew when a panic button has been pressed. These embody can embrace overhead paging systems and gadgets that send voice messages, text messages, or e-mail messages directly to smartphones.
Should you loved this post and you wish to receive more information regarding why invest in a silent alarm button generously visit the web-site.
Topics Started: 0
Replies Created: 0
Forum Role: Participant